Description
This board is a combination of our Solderable Project Box Breadboard & an ESP32 or ESP8266 or ESP01 module breakout board. They fit in the included 3.94″ x 2.375″ x 1.875″ (100x60x25mm) ABS project boxes
It features:
- ESP32 on one side, ESP8266 footprints on either side with an ESP01 in the middle
- FTDI header area
- Spaces for LDO, and pull up resistors
- Holes for 2 & 3 pin screw terminals (5mm) that are connected to power rails
- Footprint for DC power connector
- Power rails can be tied together or can be separate for different voltages
- Screw holes can be tied to ground
- Additional holes next to the rails, at the end of rows, and in the middle of the board for easily placing connectors, components, or tying together power rails and rows
- Solder pads in the middle of the board to tie rows together or add SMD components
- Snap on lid for project box
- Comes in packs of 2 with 2 3.94″ x 2.375″ x 1.875″ (100x60x25mm) boxs & 8 mounting screws
Please note – the glossy black version of this pcb had the LDO input and output switched. The current version is matte black. Please see the layout photos.
Reviews
There are no reviews yet.