2 Channel High Wattage PWM 4-Wire Computer Fan Controller with 2 Temperature Probes & Stop Alarm

Description

Features:

• Ideal for controlling high speed, high wattage server fans and other computer fans with 4 wires.
• Dual channel independent temperature control – The display will rotate between the two channels’ temperature (-9.9℃ to 70.1℃; error <1℃) and Fan Speed (resolution 10rpm; maximum display 999 x 10rpm).
• Fan speed is controlled by setting low and high temperatures. Each fan is set independently. For example, at 20℃ the fan spins at a low speed and at 40℃ the fan is at full RPM. All settings are saved.
• An alarm can be set if a fan stops rotating
• Ability to reverse PWM control logic 6. DC8-60V operating voltage

Performance parameters:

• Operating Voltage: DC8-60V (the voltage of the power supply must be equal to the fan’s operating voltage, or the fan will be damaged)
• Operating Current: 35mA (l2V) – 22mA (24V)
• Control Ability: Not limited by fan current, but fan connector pins on the board should not exceed 3A per fan; if using larger current fan, please connect fan power supply cable to the main power supply directly!
• Control Output Range: 10% – 100% (this is the signal output range; the actual situation depends on fan performance)
• Temperature Probe Specifications: NTC 10K B =3950
• Temperature Measurement: -9.9℃ to 99.9℃, error <2℃ (1% probe with 70℃) 3℃(>70℃)
• Temperature Control Zone Range: Low speed temperature 5-94℃, high speed temperature 10-99℃
• Speed Measurement: 10-9990rpm; resolution 10 rpm, display unit *10 rpm (speed measurement is based on common 2-pole signal fan design; most fans are 2-pole signal)
• Fan Rotation Stop Alarm Speed: less than 375rpm
• Circuit Dimensions: 65mm*65mm*15mm, hole center distance 56mm*56mm, diameter 3.2mm

Package includes:

• 1 x Fan temperature controller
• 2 x Temperature probe
• 1 x 12mm buzzer with 10cm wire