Description
Our DeLorean Time Machine Speedo is the perfect compliment to your CircuitSetup Time Circuits Display. We painstakingly recreated the signature Stanley segment displays (which are no longer available) that are seen in the movie. Gaffers tape covers the 3rd digit. The Speedo has a GPS chip that will output the real speed if fitted inside a car. Our TCD can also acquire accurate present time from the speedo via GPS.
Assembly is required.
Key Features:
- Speedometer via GPS
- Replicated Stanley Displays
- Real Hammond enclosure
- Real Rotex labels
- Real TRW cable connector
- Get Present Time for the TCD from GPS
- Time travel triggering when reaching 88mph (use at your own risk)
- If mounted in a car, the SID will “ramp up” and Flux Capacitor will increase the chase speed based on actual speed
The Kit Includes:
- Speedo PCB w/ Stanley displays
- Rotex labels
- TRW DIN cable connector
- GPS Antenna
- Grey connecting cable
- Hardware
Please note:
- Our TCD electronics are required for this speedo to function. It will not work independently or with other props not made by CircuitSetup.
- If you previously purchased a TCD kit and have v1.2 of the control board, you may need to solder on a connector (there are 3 spots labeled I2C). Please check before ordering, and indicate if you need a connector in the comments.
- A firmware update will be required for the Speedo to function properly if you are using v2.3 or below on your TCD.
Time travel sequence:
Thomas Winischhofer (verified owner) –
Excellent speedo replica. The Stanley readouts look fantastic, and unlike other replicas (that use mostly modern, off-the-shelf LED segment displays), the segments of the digits are properly unevenly illuminated – just like in the movies. The built-in GPS is a nice feature, but unfortunately I don’t have a Delorean, so I used it for time synchronization only.