Description
This board is a combination of our Solderable Project Box Breadboard & an ESP32 or ESP8266 or ESP01 module breakout board.
It features:
- ESP32 on one side, ESP8266 footprints on either side with an ESP01 in the middle
- FTDI header area
- Spaces for LDO, and pull up resistors
- Holes for 2 & 3 pin screw terminals (5mm) that are connected to power rails
- Footprint for DC power connector
- Power rails can be tied together or can be separate for different voltages
- Screw holes can be tied to ground
- Additional holes next to the rails, at the end of rows, and in the middle of the board for easily placing connectors, components, or tying together power rails and rows
- Solder pads in the middle of the board to tie rows together or add SMD components
- Comes in packs of 5
Please note – the glossy black version of this pcb had the LDO input and output switched. The current version is matte black. Please see the layout photos.
Richard Dorfner –
Boards arrived from Tindie in good order and look well made. I really like the flexibility of the power routing and the ease with which I can get to all the pins of the esp32 for doing Proofs of concept with the esp32.
Nice design, great price for the breakout boards as well!
Rick
Curtis –
Work great! I wish we had some examples of how to setup the LDO or other items included on the board without having to break out the DMM.
Montgomery Newcom (verified owner) –
The LDO, as pictured, is backwards from the pinout of the LM1117T-3.3 and LD33’s that I have. Other than that, this page was useful for putting this together for the first time:
https://www.14core.com/wiring-and-flashing-programming-esp-32-esp32s-with-usb-ttl-uart/